Home >> Resources/Information

Feed Screws, Designs

General feed Screw Info.

Go to link - 2005-09-08

General feed Screw Info.

Go to link - 2005-09-08

Single-Screw Extruders and Barrier Screws

Go to link - 2005-04-06

The Conical Concept of the Future

Go to link - 2005-03-01

Barrier screw designs

Go to link - 2004-11-24

General-purpose screw designs: Dysfunctional and expensive

Go to link - 2004-11-24

Canada Revenue Agency

Go to link - 2004-07-29

Extruding Polystrene Resins-Dow

Go to link - 2004-07-29

Post-Consumer Resin Screw Design

Go to link - 2004-07-29

Melting in single screw extruders models, calculations, screw design

Go to link - 2004-07-29

Injection Screw Design-GE Polymerland

Screw design recommendations
GE Polymerland - 2004-01-06

Feed screw ouput-estimated

The following calculator provides a quick estimate of an extruder output. Exact output will vary based on many factors, which do not lend themselves to easy calculations.
By Genca - 2003-10-27

IMPROVE MIXING BY GENERATING ELONGATIONAL FLOW

Go to link - 2003-10-20

PRACTICAL APPLICATIONS FOR MELT RHEOLOGY

Go to link - 2003-10-13

Custom screw design vs general purpose design-Dray

Today, in injection molding, molders are faced with many difficult challenges. Screw design is one such challenge that most processors have little or no experience. Since the development of the Reciprocating Screw, most molders have purchased or been provided so called "General Purpose" screw designs or designs with marginal improvements.
Robert Dray - 2003-10-08

Spirex signs screw manufacturing deal with Robert Barr

Go to link - 2003-09-30

Three-Dimensional Numerical Analysis of the Single Screw .

Go to link - 2003-09-28

Back Mixing in Screw Extrusion

Go to link - 2003-09-25

New Dispersive and Distributive Mixers for Extrusion and ..Injection Molding

New Dispersive and Distributive Mixers for Extrusion and ..Injection Molding - 2003-09-11

BARRIER TYPE SCREW DESIGNS-R Dray

BARRIER TYPE SCREW DESIGNS-R Dray - 2003-09-11

THE HISTORY OF EXTRUDER SCREW DESIGN-R Dray

THE HISTORY OF EXTRUDER SCREW DESIGN-R Dray - 2003-09-11

Injection screw design- Robert Dray

Go to link - 2003-09-10

Compression ratios, forum discussion

Plastic processing forum - 2003-09-10

Barrier screw discussion, forum

Barrier screw discussion, forum - 2003-09-10

Injection Screw Designs-BASF

Injectin screw designs-BASF - 2003-09-04

Mixing Screws

Mixing Screws - 2003-09-04

Screws for Polymer Processing - The Way to Better Productivity

The latest technology of screw selection and design from computer simulation to performance trials is discussed. The comparison of processor requirements with screw and barrel technology, computer simulation for proper screw selection, improved productivity through extruder screw design, spreadsheets for screw design, plasticating screw design, single screw mixing, problems and solutions, refurbish or renew, how outputs with grooved feed extruders, ion implantation treatment for screws and barrels are the topics included.

Screws for Polymer Processing - The Way to Better Productivity - 2003-09-04

A system approach to feed screw design

A system approach to feed screw design - 2003-08-29

Commentary on Barrier screw designs

Commentary on Barrier screw designs - 2003-08-29

Injection screw performance evaluation

Injection screw performance evaluation - 2003-08-29

Barrier screws for extrusion by Davis Standard

Barrier screws for extrusion- Extrusion equipment maker Davis-Standard says it has taken barrier screw technology for extrusion a step further with its new DSB-V and DSB-V1 barrier screws, introduced at NPE. These screws incorporate a new complicated geometry that is said to enhance melting and performance. They can be used on any brand of extruder.
Barrier screws for extrusion - 2003-07-31

Single Screw Extrusion & Extruder Screw Optimisation

There are two equally important approaches to the design and optimisation of extruder screws, for both single and twin screw machines. The first is an analytical approach involving the use of mathematical models and computer analysis. The second is a purely experimental approach involving the use of either production equipment or specialist small scale laboratory machines.

Single Screw Extrusion & Extruder Screw Optimisation - 2003-07-31

How to Compare Barrier Screws

Plastic Technology Inc. - 2003-07-18

Feed Screw Designs.com (Web Site)

Feed Screw Designs.com - 2003-07-18